Date: Tue, 30 Dec 2008 15:38:23 -0800 (PST)
To: puptcrit-AT-puptcrit.org
Subject: Re: [Puptcrit] Woodcarving


I tried once to hold the wod in=A0the vice and did not like the=A0dents left on the wood piece. That's why I carve holding the wood in my hand. The=A0bracing wood idea (wood frame + clamp) is a good alternative to using a vice.

--- On Tue, 12/30/08, Hobey Ford <hobeyone-AT-gmail.com> wrote:

From: Hobey Ford <hobeyone-AT-gmail.com>
Subject: Re: [Puptcrit] Woodcarving
To: puptcrit-AT-puptcrit.org
Date: Tuesday, December 30, 2008, 2:59 PM

There is another device made with a 14" piece of 12" wide pine
shelving.  screw and glue a 1" X 2" X 12" across one end. Flip
the
board and put another piece on the other end on the opposite side of
the board. Now you place the board on any work bench and the board
hooks against the edge of the bench by the piece of wood you put at
one end on the under side.  The top side of the board has the other
piece of wood acting as a stop to place your wood against while
chiselling.  Its great for bracing wood while you saw.   You can also
clamp wood at the stop.




      
_______________________________________________
List address: puptcrit-AT-puptcrit.org
Admin interface: http://lists.puptcrit.org/mailman/listinfo/puptcrit
Archives: http://www.driftline.org